Asterisk Digital Trunk Card TE220E PCI-Express J1interface 2 Port T1 / E1 / PRI digium for 4U opensource

TE220E is a with 2 ports, selectable E1 (32-channel) or T1 (24-channel) card that
supports all the functionality of the Digium quad T1/E1 card. This card supports both
voice and data modes on its single span. For example, the card can support 12
channels dedicated to voice and 12 to data while passing all traffic through to the
Asterisk PBX, which reliably routes the channels to their designated locations. This
eliminates the need for an external router.
By utilizing our TDMoE technology, an
exclusive Digium process, one can easily connect multiple PCs equipped with the card
and achieve voice quality on par with single PBX implementations. Scalability for this
product is derived from adding multiple cards to each individual PC. Add addition cards
as you need them for your expanding applications.
The card supports industry standard
telephony and data protocols, including both RBS and Primary Rate ISDN (PRI)
protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The
board drives both line-side and trunk-side interfaces, including call features.
The card
is a compact and powerful interface supporting voice and data transmission over T1,
E1, and Primary Rate ISDN (PRI) connections. A low profile, half-length PCI form factor
allows this device to fit within a 2U rackmount case or equivalent chassis, offer
excellent density for call center, service provider, and other space-sensitive
applications.

Of course, the asterisk card TE220E is fully supported by Digium open
source Asterisk PBX software. Used in conjunction with Asterisk, the card offers the
power to create a seamless network, interconnecting PSTN with the emerging Voice-
over IP technologies. The card can be used to deliver a wide range of PBX and IVR
services to the network or handset including Three-Way Calling, Call
Conferencing,Voicemail ,and VoIP Gateways. 

Interfaces:
- 2X E1/T1 interfaces ( E1/T1
selectable) 
- 2U class high 
- PCI interface
Features:

One PRI port 30 channels 
Hardware
DTMF detection
Conference Bridge
PCM bus connectors (PCM30, PCM64, PCM128)
2 dual-color LEDs (layer 1 state indicators)
Active channel switching (across multiple
cards over the external PCM bus)
PRI ISDN protocol stack
Suitable for 3.3 volts and 5.0
volts 32 bit PCI 2.2 slots

Applications:
ISDN PRI PBX
ISDN least cost router
Voice over IP
PRI gateways
VoIP integration of ISDN equipment
PBX to PBX trunking
IVR
Data Modes:
Cisco HDLC
HDLC
PPP
Multilink PPP
Frame Relay
Voice Modes:
-EuroISDN
-AT&R 4ESS
-
Lucent 5E
-National ISDN2